ESPECIFICATIONS G-24
Model A
Holding Force 200 lbs.
# of Drives 1
Weight 200 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 16˝
Gauge Bar Length 3′
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width Up to 4′
The A compact gauge for press brakes with 12˝ to 42˝ between sideframes. This unit is available with a 3′ gauge bar for light applications.
Model B
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 40˝
Gauge Bar Length 7′
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width 5′ to 8’6˝
The B is Automec’s most popular model. Ideal for pressbrakes with up to 8’6˝ between the sideframes.
Model HD
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 77˝
Gauge Bar Length 11′
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width 9′ to 14′
The HD heavy-duty offers more rigidity for larger pressbrakes or when progressive die set-ups are used.
Model BP or HDP
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 40˝
Gauge Bar Length 7′
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width 5′ to 8’6˝
The P models are required for Amada, Promecam, and other brakes in which the rear bed clearance is less than 7˝. This low-profile backgauge bolts right to the die rail.
Model TD
Holding Force 600 lbs.
# of Drives 3
Weight 450 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 148˝
Gauge Bar Length 18′
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width Over 14′
The TD has 3 drive screws with the center drive flanked by 2 drives 6′ away on each side. Designed for large bed pressbrakes.
ESPECIFICATIONS MB
Model MINIBRUTE
Holding Force 200 lbs.
# of Drives 1
Weight 200 lbs.
Overall Height 21˝
Overall Depth 41˝
Overall Width 31˝
Gauge Bar Length 66′
Positioning Speed 600 IPM
Gauge Travel 20˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width 3′ to 8′ 6˝
The MINIBRUTE compact gauge for pressbrakes with 3′ to 8′ 6˝ between sideframes. This unit is available with a 66˝ gauge bar and provides up to 20˝ of travel.
ESPECIFICATIONS G48
Model G48HD or G48TD
Holding Force 400 lbs.
# of Drives 2
Weight 590 lbs.
Overall Height 32˝
Overall Depth 75˝
Overall Width 84˝
Gauge Bar Length 11′
Positioning Speed 600 IPM
Gauge Travel 49˝
Repeatability ± .002˝
Vertical Height Adjustment 12˝
Recommended Width 96˝ to 144˝
The G48 plate gauge is designed for heavy forming operations offering significant productivity improvments when handling larger, heavier workpieces.