Logotipo Whitney

Punzonadoras portables

Líder en punzonadoras portables para vigas

Series:   Ala (flange) | Alma (web)

Punzonadoras portables Whitney

Las punzonadoras portables son máquinas muy versátiles de gran ayuda para la fabricación de estructuras, reduciendo costos en la perforación de vigas. Ahorre tiempo evitando el barrenado de vigas con taladro o con soplete, trabajo limpio y sin rebaba.

Ala (flange)

Las prensas portátiles son máquinas-herramienta de alta calidad, respaldados por Whitney con experiencia y servicio al cliente.

Punzonado en ángulos, alas rectas (flanges) de vigas y canales (alas cónicos)

Capacidad de punzonado: desde 20 hasta 250 toneladas

Diámetro de punzonado: desde 13/16″ hasta 2 3/8″

Capcidad de corte: desde 9/16″ hasta 1 3/8″

Profundidad de garganta: desde 2 1/4″ hasta 12 1/2″

Included

  • Porta die replaceable
  • Adjustable drift (ring type)
  • Coupling nut for clamping the punch
  • Manual (operation and maintenance)

Brute force; Proven high pressure hydraulics-5000 P.S.I; Precise control; Smooth; Shock free

Double-acting hydraulics; No spring stripping

Rugged cast steel frame construction; Take abuse; Long life

Quick easy tool change; Change hole size in minutes

Take presses to the work; Reduce material handling; Don’t drag the work to the press

Complete punch cycle control; Jog punch to layout mark

Clean punched holes; Any shape; No burrs; Scrap removed as slug without messy chip

Lowest cost method; Just a few seconds per hole

Easily maintained; Backed by W.A. Whitney Co. parts and services

Applications

  • Estructural fabrication plants
  • Ship building
  • Rail car builders
  • Bridge fabricators
  • Tower fabricators
  • Sign shops
  • Miscellaneous steel fabrication

Models for every shape

  • Wide flanges
  • Channels
  • ‘I’ Beams
  • ‘T’s
  • Angles
  • Flats
  • Specials

Prensas portatiles Flange (ala) de Whitney

Hydraulic power units

  • Model 700-SV-1A
  • This power unit offers 1-1/2 horsepower for operation of presses requiring greater portability than afforded with some of the larger model power units. It weighs only 65 pounds and operates at 5000 psi on 115 volt, 60 hz single phase
  • Model 700-5V-3A, 700-5V-10A and 700-SV-20A
  • These power units use a pump, reservoir and valving assembly sized for either 3, 10 or 20 horsepower electric motors. This line of power units is available in single (1V), double (2V), and three valve (3V) models and operate also at 5000 psi
Hydraulic power units
MODEL 700-SV-1A 700-SV-3A 700-SV-10A 700-SV-20A
HORSE POWER 1-1/2 HP 3 HP 10 HP 20 HP
OPERATING PRESSURE 5000 PSI 5000 PSI 5000 PSI 5000 PSI
PUMP OUTPUT
“0” PSI
5000I

400 CU IN/MIN
70 CU IN/MIN

1.5 GPM
1.4 GPM

4.6 GPM
4.1 GPM

8.3 GPM
7.5 GPM
RESERVOIR CAPACITY IN GALLOWS 1 14 14 30
HYDRAULIC OIL ISO GRADE 32 AW
ISO GRADE 32 AW
155 SSU – 100o F
ISO GRADE 32 AW
155 SSU – 100o F
ISO GRADE 32 AW
155 SSU – 100o F
OIL FILTER CARTRIDGE TYPE CARTRIDGE TYPE CARTRIDGE TYPE
MOTOR 115 VOLT 60 HZ
SINGLE PHASE
230/460 VOLT 60 HZ
3 PHASE T.E.F.C
230/460 VOLT 60 HZ
3 PHASE* T.E.F.C
230/460 VOLT 60 HZ
3 PHASE T.E.F.C
HOSE SIZE 1/4″ I.D.
1/4″ NPT
1/4″ I.D.
1/4″ NPT
3/8″ I.D.
1/4″ NPT
3/8″ I.D.
1/4″ NPT
DIMENSIONS
WIDTH-DEPTH-HEIGHT
12-1/2″ x 8″ x 19″
OVER-HANDLE
29-3/8″ x 16″ x 33-7/8″ 29-3/8″ x 16″ x 33-7/8″ 29-3/8″ x 16″ x 46″
Weight (with oil) 65 lbs. 358 lbs. 414 lbs. 670 lbs.
CASTERS NO OPTIONAL OPTIONAL OPTIONAL
Ambient temperature range is 50 to 105o F. For other operation consult factory for specific applications.
*230 volt single phase also available.

Bridge strippers

  • If a hole to be punched is near the edge of the part and both legs of the standard adjustable ring stripper cannot contact the material, it is necessary to use a bridge stripper. This stripper should also be used for thin materials that could become deformed by the stripping force. It can be easily attached to the bottom of a ring stripper with set screw

Die Clearance (ASTM-A36 Structural Steel)

  • Be sure to allow for proper die clearance. The standard clearance of the die styles used with our presses and die diameter should be approximately 15% of the material thickness. Consult factory for recommended die clearances for other materials
MATERIAL THICKNESS DIE CLEARANCE
(in.) (in.)
1/8 thru 1/4 .020 over nominal (.020)
1/4 thru 1/2 1/32 over nominal (.051)
7/16 thru 13/16 1/16 over nominal (.082)
5/8 thru 1-1/16 3/32 over nominal (.111)
1 thru 1-1/4 1/8 over nominal (.145)

Pin location (790XX, 7502, 7602 keyed dies)

  • When ordering shaped dies, specify LR (left to right) or FB (front to back) placement. If not specified, LR location will be shipped

Handlebars

  • Are available on many models, for convenience in positioning presses

See through guard
See through guard

Hose assembly

  • Lenght:
  • 12′
  • 20′
  • 40′

Vdditional valve

Tools

TOOLING FOR PORTABLE PRESSE
Press model no. Use with punch style Use with die style Punch and die size (in 1/32″ increments)
Round Square Obround Rectangle
From Thru From Thru From Thru From Thru
720
720X6
721
720 720 1/8 13/16 3/16 9/16 3/16 13/16 3/16 13/16
730CC
731
740 720 7/32 13/16 3/16 9/16 3/16 13/16 3/16 13/16
730
730×8
750
751
740 740 7/32 1-1/2 1/4 1 1/4 1-1/2 1/4 1-1/2
770
771
790
791
770 740 7/32 1-1/2 1/4 1 1/4 1-1/2 1/4 1-1/2
790AX6
791AX18
791AX30
*770 or *790XX *740 or *790XX 7/32 1-1/2 1/4 1 1/4 1-1/2 1/4 1-1/2
7150AX6
7151AX12
*770/*790XX
7501
7502 7/32 2 1/4 1-13/32 1/4 2 1/4 2
7150AX12 *770/*790XX
7501
7602 7/32 3 1/4 2-1/16 1/4 3 1/4 3
7250AX12 7501 7602 7/32 2-3/8 1/4 1-5/8 1/4 2-3/8 1/4 2-3/8
* Interchangeable within obtainable size range – but limited to a maximum of 100 tons punching force. #770 punches can only be used for punching round holes. For shaped holes use of keyed alignment feature is recommended. Presses with keyed feature are available at additional cost.

Suspension springs

  • Suspension springs allow the operator to easily and quickly “float” the press when locating the hole to be punched. These springs are available in different sizes. The spring capacity is determined by the weight of the press to be suspended. A spring may be fastened to an overhead crane, or other movable support, to obtain greater portability of the press
ESPECIFICATIONS
Model Spring capacity (min and max libs) L free lenght (in) M lenght (in) at max load (approx) Spring rate lb/in D outside dia (in) Spring no.
721
730
730CC
730X8
731
750
770
0-240 17 28 20 2-1/2 700-377
751
790
790AX6
75-450 24 39 50 3 700-353
771
791
275-1200 36 55 50 3-1/2 700-352
791AX18
7150AX6
7150AX12
550-2400 41 60 100 Two springs 3-1/2 ea 806-134
791AX30
7151AX12
3000-5000 45-1/4 53-1/4 250 9-1/2 791-040
TONNAGE CAPACITY SELECTION
TONS FORCE REQUIRED TO PUNCH ASTM-A36 STRUCTURAL STEEL
(60,000 PSI shear strength) for other materials see chart below for multipliers
MATERIAL THICKNESS
Hole Dia. (inches) 1/16 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4
0.063 0.125 0.187 0.250 0.312 0.375 0.500 0.625 0.750 0.875 1.000 1.125 1.250
1/4 1.4 4.4 5.9 7.3 8.8
5/16 1.8 3.7 5.5 7.4 9.2 11.0
3/8 2.1 4.4 6.6 8.8 11.0 13.3 17.7
7/16 2.5 5.2 7.7 10.3 12.9 15.5 20.6
1/2 2.8 5.9 8.8 11.8 14.7 17.7 23.6 29.5
9/16 3.2 6.7 9.9 13.2 16.5 19.9 26.5 33.1
5/8 3.5 7.4 11.0 14.7 18.4 22.1 29.4 37.0 44.2
11/16 3.9 8.1 12.1 16.2 20.2 24.3 32.4 40.5 48.6
3/4 4.2 8.9 13.2 17.7 22.1 26.5 35.3 44.2 53.0 62.0
13/16 4.6 9.6 14.3 19.1 24.0 28.7 38.3 48.0 57.4 67.0 76.6
7/8 4.9 10.3 15.4 20.6 25.7 31.0 41.0 51.5 62.0 72.2 82.5
15/16 5.3 11.1 16.5 22.1 27.6 33.1 44.2 55.2 66.3 77.3 88.3 99.4
1 5.6 11.8 17.6 23.6 29.4 35.3 47.1 59.0 70.7 82.5 94.3 106.0
1-1/16 6.0 12.5 18.7 25.0 31.3 37.6 50.0 62.6 75.0 87.7 100.0 113.0 125.2
1-1/8 6.3 13.3 19.8 26.5 33.0 39.7 52.9 66.2 79.4 92.7 106.0 119.0 132.5
1-3/16 6.7 14.0 20.9 28.0 34.9 42.0 55.9 69.9 83.9 97.9 111.9 125.9 139.9
1-1/4 7.1 14.7 22.0 29.5 36.8 36.8 58.9 73.7 88.4 103.2 117.9 132.6 147.3
1-5/16 7.4 15.5 23.1 30.9 38.6 46.3 61.8 77.2 92.7 108.1 123.6 139.0 154.6
1-3/8 7.8 16.2 24.2 32.4 40.4 48.6 64.8 81.0 97.2 113.4 129.6 145.8 162.0
1-1/2 8.5 17.7 26.4 35.3 44.1 53.0 70.6 88.3 106.0 123.6 141.3 159.0 176.7
1-3/4 9.9 20.6 30.9 41.2 51.5 61.9 82.5 103.1 123.7 144.3 164.9 185.6 206.2
2 11.3 23.6 35.3 47.1 58.8 70.7 94.3 117.8 141.4 164.9 188.5 212.1 235.6
2-1/4 12.7 26.5 39.7 53.0 66.2 79.5 106.0 132.5 159.0 185.6 212.1 238.6
2-1/2 14.2 29.5 44.1 58.9 73.5 88.4 117.8 147.3
2-3/4 15.6 32.4 48.5 64.8 80.9 97.2 129.6
3 17.0 35.4 52.9 70.7 88.2 106.0 141.4
ESPECIFICATIONS
STANDARD FLANGE PRESSES
Model Capacity Max. Dia Hole* Max. Materials thickness* Throat ddepth Stroke Weight (lbs.) Punch style Die style Recomended
Power unit
Approx. punching cycle time
720 20 13/16 9/16 2-1/4 7/8 36 720 720 700-SV-1A
or 700-SV-3A
5.00
3.00
720X6 20 13/16 9/16 6 7/8 77 720 720 700-SV-1A
or 700-SV-3A
5.00
3.0
730 30 1-1/2 5/8 3-1/8 7/8 70 740 740 700-SV-1A
or 700-SV-3A
7.00
4.00
730CC 30 13/16 5/8 3-1/8 7/8 70 740 720 700-SV-1A
or 700-SV-3A
7.00
4.00
730X8 30 1-1/2 5/8 8 7/8 130 740 740 700-SV-1A
or 700-SV-3A
7.00
4.00
750 50 1-1/2 3/4 4-1/4 1-3/8 200 740 740 700-SV-3A
or 700-SV-10A
12.00
5.00
770 70 1-3/8 1 4-1/4 1-3/8 240 770 740 700-SV-10A 6.00
790 90 1-1/4 1 4-1/4 1-3/8 275 770 740 700-SV-10A
or 700-SV-20A
7.00
4.00
“A” SERIES FLANGE PRESSES
790AX6 100 1-1/2 1-1/8 6-1/4 1-5/8 450 770
790XX
740
790XX
700-SV-10A
or 700-SV-20A
8.00
5.00
7150AX6 150 2 1-3/8 6-1/4 2 1100 770/790XX
7501
7502 700-SV-20A 9.00
7150AX12 150 3 1-3/8 12-1/2 2 2100 770/790XX
7501
7602 700-SV-20A 9.00
7250AX12 250 2-3/8 1-3/8 12-1/2 2 4800 7501 7602 700-SV-20A 14.00
* Hole diameter & material thickness capacities are given independent of each other. Maximum diameter of hole punched in a given thickness of material is dependent on press tonnage capacity and material specifications.
DIMENSIONS — STANDARD FLANGE PRESSES
20 TON THRU 90 TON CAPACITIES
Model 720 720X6 730 730CC 730X8 750 770 790
CAPACITY TONS 20 20 30 30 30 50 70 90
THROAT DEPTH A 2-1/4 6 3-1/8 3-1/8 8 4-1/4 4-1/4 4-1/4
B 1-5/8 1-9/16 1-15/16 1-15/16 2-1/8 2-1/16 2-11/16 3-1/4
C 4-1/2 4-1/2 5-1/2 5-1/2 5-1/2 7-1/4 8-1/4 9-1/2
D 11/16 11/16 1-1/8 11/16 1-1/8 1-1/8 1-1/8 1-1/8
E 5/8 5/8 21/32 21/32 21/32 1-3/32 1-3/32 1-3/32
F 1-7/16 1-7/16 1-7/8 1-7/8 1-7/8 2-5/32 2-5/32 2-1/4
G 2-1/2 3-3/4 3-1/4 3-1/4 5-1/4 4-1/4 4-3/4 5
H 10-5/8 11-7/8 11-7/8 12-11/16 15-3/8 16-1/4 17-3/4 18-5/8
I 7/8 7/8 1-5/8 7/8 1-5/8 1-9/16 1-7/16 1-5/16
J 5 11 7-1/4 7-1/4 13-1/4 9-1/4 9-3/4 10-1/4
K 2-1/4 2-1/4 2-3/4 2-3/4 3-1/2 3-1/2 4 4-1/2
L 1-7/8 2-1/8 2-11/16 2-11/16 3-1/8 3-3/16 3-7/16 3-1/2
M 1-1/4 1-5/8 1-7/8 1-7/16 2-3/16 2 2 2-1/8
R 3 3 4 4 4 5 5 5
PRESS PART NO. 720-000 720-044 730-000 730-020 730-019 750-015 770-015 790-024
DIMENSIONS — STANDARD FLANGE PRESSES (IMG)
DIMENSIONAL CAPABILITIES
DIMENSIONS — ‘A’ SERIES FLANGE PRESSES
100 TON THRU 250 TON CAPACITIES
Model 790AX6 7150AX6 7150AX12 7250AX12
CAPACITY TONS 100 150 150 250
THROAT DEPTH A 6-1/4 6-1/4 12-1/2 12-1/2
B 3-1/4 3 3 5-1/2
C 9-1/2 13-1/2 13-1/2 17
D 1 1-7/16 2 2-1/16
E 1-5/16 1-5/8 1-5/8 1-5/8
F 3-11/16 4-1/8 4-1/8 4-3/16
G 8 10-9/16 13 16
H 24-13/16 32 34-3/8 44-1/4
I 1-9/16 2-1/8 3-1/8 2-5/8
J 17-1/2 23-1/4 33-1/2 38
K 5-5/8 7 7 11
L 4-3/4 5-7/8 5-7/8 9
M 3-1/4 4-1/2 6-1/2 5-1/2
N 3-13/16 4 6 7
P 5 12 16 19
Q 3/4-10 7/8-9 7/8-9 7/8-9
R on 4-1/2 4-1/2 4-1/2
NO. OF MTG. HOLES 2 4 4 4
PRESS PART NO. 790-084 715-028 715-029 817-333
DIMENSIONS — ‘A’ SERIES FLANGE PRESSES (IMG)

Servicio autorizado y refacciones en México

Whitney cuenta con su distribuidor autorizado, Mercado Machinery, que desde 1991 ofrece en México asesoría técnica, servicio, refacciones y herramientas. En caso de cualquier problema técnico que no pueda solucionarse por teléfono, Mercado Machinery se compromete a una respuesta de 24 horas máximo para tener en su planta a un ingeniero de servicio calificado en reparaciones de cualquier equipo Whitney.

Garantía

Mercado Machinery garantiza su línea completa de punzondadoras portables Whitney por defectos en los materiales o en la mano de obra por los siguientes períodos:

  • Partes y refacciones: 12 meses
  • Mano de obra: 12 meses
  • De acuerdo a la póliza de garantía de Mercado Machinery

Instalación y capacitación

  • Supervisión de instalación
  • Puesta en marcha
  • Capacitación de operación
  • Capacitación de mantenimiento de rutina
  • Programación (cuando se requiera)

Soporte técnico en campo y asistencia telefónica